Skip to main content
英語
イタリア語

手順 6を翻訳中

Step 6
Go around your device with the plastic pry tool, there a 3 clips on each side of the housing. There is a connection for the antenna from the front to mid housing. Remove it with a pry tool if it does not come off by itself. There is a connection for the antenna from the front to mid housing. Remove it with a pry tool if it does not come off by itself.
  • Go around your device with the plastic pry tool, there a 3 clips on each side of the housing.

  • There is a connection for the antenna from the front to mid housing. Remove it with a pry tool if it does not come off by itself.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります