手順番号1–PSP 300xc Home Bar Replacementを翻訳 - iFixit

修理を始めるには

修理する権利

パーツ＆ツール

注意：あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

ガイドに戻る

英語

日本語

手順 1を翻訳中

手順1

Lift the home bar up as high as it will go, but not so high that the wires disconnect.

Try to bend the small tab under the silver rim as little as possible it the following steps. The more you bend, the more likely it will snap.

Twist the home bar counter clockwise while carefully lifting it further. The left edge has to lift over the black plastic frame to allow it to rotate.

Lift the home bar up as high as it will go, but not so high that the wires disconnect.
Try to bend the small tab under the silver rim as little as possible it the following steps. The more you bend, the more likely it will snap.
Twist the home bar counter clockwise while carefully lifting it further. The left edge has to lift over the black plastic frame to allow it to rotate.
The home bar should now lift out of the PSP 300xc.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。