メインコンテンツにスキップ
英語
日本語

手順 7を翻訳中

手順7
Now use a safe pry tool, and go along the edges of the phone to release the clips to open the housing. There are a total of 6 clips, 3 on each side. There is a small cap connection that connects the antenna to the logic board as pictured. There is a small cap connection that connects the antenna to the logic board as pictured.
  • Now use a safe pry tool, and go along the edges of the phone to release the clips to open the housing. There are a total of 6 clips, 3 on each side.

  • There is a small cap connection that connects the antenna to the logic board as pictured.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります