メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。

英語
日本語

手順 4を翻訳中

手順4
Use an iOpener or a heat gun to loosen up the adhesive securing the motherboard to the display assembly. Use a plastic opening tool to gently pry the motherboard free of the display assembly. At this point, the bottom speaker is still attached to the motherboard. If you are only replacing the motherboard, refer to the bottom speaker guide to swap your existing speaker to the new motherboard.
  • Use an iOpener or a heat gun to loosen up the adhesive securing the motherboard to the display assembly.

  • Use a plastic opening tool to gently pry the motherboard free of the display assembly.

  • At this point, the bottom speaker is still attached to the motherboard. If you are only replacing the motherboard, refer to the bottom speaker guide to swap your existing speaker to the new motherboard.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります