メインコンテンツにスキップ
英語
日本語

手順 4を翻訳中

手順4
Hold back the strips of EMI tape along the lower edge of the LCD as you remove the two T5 Torx screws securing the retaining clips shown. Stick the tape down against the new clips and reinstall the two T5 Torx screws. Stick the tape down against the new clips and reinstall the two T5 Torx screws.
  • Hold back the strips of EMI tape along the lower edge of the LCD as you remove the two T5 Torx screws securing the retaining clips shown.

  • Stick the tape down against the new clips and reinstall the two T5 Torx screws.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります