メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての5個のガイドに反映されます。

英語
イタリア語

手順 6を翻訳中

手順6
Starting in a corner of the device where the casing and the side meet, use a pointed metal spudger to pry the back casing off the speaker and the glue holding the seam together. Slide the metal spudger along the seam to separate the back casing from the rest of the speaker.
  • Starting in a corner of the device where the casing and the side meet, use a pointed metal spudger to pry the back casing off the speaker and the glue holding the seam together.

  • Slide the metal spudger along the seam to separate the back casing from the rest of the speaker.

Partendo da un angolo del dispositivo dove il case e il lato si incontrano, usa uno spduger di metallo per allontanare le due parti, vincendo la forza adesiva della colla.

Fai scorrere lo spudger di metallo lungo il lato per separare il case posteriore dal resto dello speaker.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります