メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての5個のガイドに反映されます。

英語
フランス語

手順 3を翻訳中

手順3
Use a spudger to carefully remove the liquid electrical tape that holds the battery inside the battery compartment. Be careful not to puncture the battery, or damage the battery wire underneath the liquid electrical tape.
  • Use a spudger to carefully remove the liquid electrical tape that holds the battery inside the battery compartment.

  • Be careful not to puncture the battery, or damage the battery wire underneath the liquid electrical tape.

Utiliser une spatule (spudger) pour retirer délicatement l'adhésif isolant électrique liquide qui maintient la batterie dans son compartiment.

Faites attention à ne pas percer la batterie ni endommager sa nappe sous l'adhésif isolant.

-[* black] Use a spudger to carefully remove the liquid electrical tape holding the battery inside the battery compartment.
-[* icon_caution] Be careful to not puncture the battery, or damage the battery wire underneath the liquid electrical tape.
+[* black] Use a spudger to carefully remove the liquid electrical tape that holds the battery inside the battery compartment.
+[* icon_caution] Be careful not to puncture the battery, or damage the battery wire underneath the liquid electrical tape.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります