メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての5個のガイドに反映されます。

英語
中国語

手順 4を翻訳中

手順4
Use a nylon spudger to lift the battery out of the device. Lift the end of the battery that does not have the wire connection and remove the 16 mm PH2 screw underneath the battery.
  • Use a nylon spudger to lift the battery out of the device.

  • Lift the end of the battery that does not have the wire connection and remove the 16 mm PH2 screw underneath the battery.

  • Notice the wire that is connecting the battery to the device. Attempting to remove the battery completely could cause damage to the wire. Do not use a metal spudger to remove the battery, this could cause damage.

使用金属撬棒将电池从设备边缘翘出。

将电池提起足够的电池,以将其下方的16mm PH2螺丝卸下。

抬起电池太远会损坏电池线。

-[* black] Use a metal spudger to pry the edge of the battery out of the device.
-[* black] Lift the battery just enough to remove the 16mm PH2 screw underneath it.
-[* icon_caution] Lifting the battery too far will cause damage to the battery wire.
+[* black] Use a nylon spudger to lift the battery out of the device.
+[* black] Lift the end of the battery that does not have the wire connection and remove the 16 mm PH2 screw underneath the battery.
+[* icon_caution] Notice the wire that is connecting the battery to the device. Attempting to remove the battery completely could cause damage to the wire. Do not use a metal spudger to remove the battery, this could cause damage.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります