メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての5個のガイドに反映されます。

英語
フランス語

手順 4を翻訳中

手順4
Use a nylon spudger to lift the battery out of the device. Lift the end of the battery that does not have the wire connection and remove the 16 mm PH2 screw underneath the battery.
  • Use a nylon spudger to lift the battery out of the device.

  • Lift the end of the battery that does not have the wire connection and remove the 16 mm PH2 screw underneath the battery.

  • Notice the wire that is connecting the battery to the device. Attempting to remove the battery completely could cause damage to the wire. Do not use a metal spudger to remove the battery, this could cause damage.

Utilisez une spatule (spudger) en métal pour soulever le bord de la batterie et la retirer de l'enceinte.

Soulevez la batterie et retirez la vis PH2 de 16 mm en dessous.

Faites attention à la nappe de la batterie qui la relie à l'enceinte. Si vous retirez complètement la batterie, vous risquez d'endommager cette nappe.

-[* black] Use a metal spudger to pry the edge of the battery out of the device.
-[* black] Lift the battery and remove the 16 mm PH2 screw underneath.
-[* icon_caution] Notice the battery wire connecting the battery to the device. Attempting remove the battery completely could cause damage to the wire.
+[* black] Use a nylon spudger to lift the battery out of the device.
+[* black] Lift the end of the battery that does not have the wire connection and remove the 16 mm PH2 screw underneath the battery.
+[* icon_caution] Notice the wire that is connecting the battery to the device. Attempting to remove the battery completely could cause damage to the wire. Do not use a metal spudger to remove the battery, this could cause damage.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります