ご注意:あなたは前提となるガイドを編集しています。あなたが行なう変更は、この手順を含むガイド全体に反映されます。
手順 4を翻訳中
手順4

-
Unscrew the camera from the back of the motherboard using the ifixt PH00 screwdriver.
-
Gently push on the black plastic bracket holding the camera in place. The bracket should pop right out.
-
The screws for mounting bracket are also 1.5mm diameter and 3.5mm long.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。