メインコンテンツにスキップ
英語
日本語

手順 4を翻訳中

手順4
With a sharp, thin bladed knife carefully cut through the adhesive pads that hold the battery pack to the screen back shield.
  • With a sharp, thin bladed knife carefully cut through the adhesive pads that hold the battery pack to the screen back shield.

  • Angle the blade slightly downward so that it will not cut through the mylar jacket

  • Remove the battery pack

  • Avoid flexing the battery pack

  • It is important that the blade is longer than the width of the battery pack so that it is never under the pack. The tip could penetrate the battery pack’s mylar jacket if it is under the battery pack while cutting through the adhesive pads.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります