メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての6個のガイドに反映されます。

英語
イタリア語

手順 2を翻訳中

手順2
Insert the flat end of the heavy-duty spudger between the wires and underneath the battery connector. Carefully lift the black battery connector up to disconnect it from the motherboard. The metal spudger shown in the photo is not recommended due to the possibility of an electrical short. Use an ESD-safe tool, such as a heavy-duty (nylon) spudger. The metal spudger shown in the photo is not recommended due to the possibility of an electrical short. Use an ESD-safe tool, such as a heavy-duty (nylon) spudger.
  • Insert the flat end of the heavy-duty spudger between the wires and underneath the battery connector. Carefully lift the black battery connector up to disconnect it from the motherboard.

  • The metal spudger shown in the photo is not recommended due to the possibility of an electrical short. Use an ESD-safe tool, such as a heavy-duty (nylon) spudger.

Inserisci la parte piatta dello spudger di plastica tra i cavi e la parte inferiore del connettore della batteria. Facendo attenzione solleva il connettore nero della batteria per scollegarla dalla scheda madre.

Lo spudger di metallo mostrato in foto non è consigliato in quanto può provocare cortocircuiti. Usa uno strumento ESD, come lo spudger di nylon.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります