メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

英語
日本語

手順 6を翻訳中

手順6
Once the bolt is removed from the bottom of the carburetor tank, gently pry open the tank with a metal prying spudger until it pops off. If you do not have a spudger, a flathead screwdriver will work. Completely remove the tank so you can clean it or replace it.
  • Once the bolt is removed from the bottom of the carburetor tank, gently pry open the tank with a metal prying spudger until it pops off. If you do not have a spudger, a flathead screwdriver will work.

  • Completely remove the tank so you can clean it or replace it.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります