メインコンテンツにスキップ
英語
日本語

手順 4を翻訳中

手順4
Once all the oil is drained from your mower, tilt everything right-side-up and refill the engine with oil by pouring directly into the hole. Insert the cap back onto the hole and tighten to close.
  • Once all the oil is drained from your mower, tilt everything right-side-up and refill the engine with oil by pouring directly into the hole.

  • Insert the cap back onto the hole and tighten to close.

  • It can be helpful to use a funnel to ensure that the oil does not spill over the outside of your engine. Spilled oil can be difficult to clean up.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります