メインコンテンツにスキップ
英語
日本語

手順 2を翻訳中

手順2
Before continuing, take note of your current oil level by following these steps. The metal rod attached to the cap is the dip stick and is used to test the oil level in your mower.
  • Before continuing, take note of your current oil level by following these steps.

  • The metal rod attached to the cap is the dip stick and is used to test the oil level in your mower.

  • Wipe any oil off the tip of the stick and reinsert it into the mower. Make sure to tighten the cap down when doing so.

  • Remove the cap and stick once again and note the height of the oil left on the bottom of the stick.

  • If the oil is in between the two small holes, looks clean, and you haven't experienced any mechanical difficulties, your mower's oil is in good shape and does not need replacement.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります