メインコンテンツにスキップ
英語
日本語

手順 3を翻訳中

手順3
Once the boards, speakers, and micro-SD card reader have been disconnected, the frame is left sitting on top of the LCD-digitizer.
Inside the Tablet, Too
  • Once the boards, speakers, and micro-SD card reader have been disconnected, the frame is left sitting on top of the LCD-digitizer.

  • There are nine screws holding the frame in place.

  • Remove the frame and the LCD, micro USB jack, and digitizer can be accessed.

  • Take caution when removing the frame. The wire for the micro USB jack runs through the frame and needs to be walked through the holes by hand.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります