メインコンテンツにスキップ
英語
日本語

手順 1を翻訳中

手順1
Locate the 2 screws on the handle casing. These screws are mirrored on the handle attachment on the other side panel as well. Unscrew the two 16mm screws using the Phillips #0 screw driver. Repeat for the opposite side panel.
  • Locate the 2 screws on the handle casing. These screws are mirrored on the handle attachment on the other side panel as well.

  • Unscrew the two 16mm screws using the Phillips #0 screw driver. Repeat for the opposite side panel.

  • You do not need to remove the motherboard to reach the screws next to the lens. This is only done to show the screws more clearly.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります