メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての8個のガイドに反映されます。

英語
中国語

手順 4を翻訳中

手順4
Insert the flat end of a spudger between the upper and lower case where they meet at the rear of the side vent opening. There is a strong plastic clip connecting the two case halves (the first of many), so you'll need to use quite a bit of force.
  • Insert the flat end of a spudger between the upper and lower case where they meet at the rear of the side vent opening.

  • There is a strong plastic clip connecting the two case halves (the first of many), so you'll need to use quite a bit of force.

  • Leave the spudger in place until you open the case completely. The clips are very springy and may cause the case to snap shut while you're working.

在机壳后方侧面通风口处上下接缝中插入撬棒的扁平端。

卡扣的力量非常大(通常第一个就是这样),需要您使用一点力气。

将撬棒留在原位直至您完全打开,机壳是十分有弹性的,避免一会自己自动卡回去。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります