メインコンテンツにスキップ
英語
日本語

手順 2を翻訳中

手順2
Using a Phillips #00 precision screwdriver, remove the five 3mm screws. Using a plastic opening tool, slowly lift up the entire metal piece from the back of the camera.
Remove the Metallic Panel
  • Using a Phillips #00 precision screwdriver, remove the five 3mm screws.

  • Using a plastic opening tool, slowly lift up the entire metal piece from the back of the camera.

  • If the panel has never been removed from the camera before, it will be glued firmly to the back panel and will require some force to remove. To prevent breaking the back panel, work the plastic opening tool under different areas of the metal plate until it is completely released.

  • There are two small magnetic blocks housed underneath the metallic plate. These are for securing the swivel screen in place while it is closed.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります