メインコンテンツにスキップ
英語
日本語

手順 1を翻訳中

手順1
Using a Phillips #00 precision screwdriver, remove the four 1mm screws that are holding the black supports to the panel. Remove the little ribbon tab from the contact pad using tweezers or your fingers, then peel off the black ribbon from the metallic panel. Feed the ribbon through the slot on the back panel to free the LCD Screen. You need to bend the ribbon to get the small tabs through it.
Remove the LCD Screen
  • Using a Phillips #00 precision screwdriver, remove the four 1mm screws that are holding the black supports to the panel.

  • Remove the little ribbon tab from the contact pad using tweezers or your fingers, then peel off the black ribbon from the metallic panel.

  • Feed the ribbon through the slot on the back panel to free the LCD Screen. You need to bend the ribbon to get the small tabs through it.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります