メインコンテンツにスキップ
英語
日本語

手順 1を翻訳中

手順1
Use the edge of an iPod opening tool to begin peeling the loop of copper tape wrapped around the connector near the center of the top edge of the logic board. Continue peeling the tape until it is free from the logic board. Using a pair of tweezers to peel the tape greatly simplifies the task if you've got them.
  • Use the edge of an iPod opening tool to begin peeling the loop of copper tape wrapped around the connector near the center of the top edge of the logic board.

  • Continue peeling the tape until it is free from the logic board.

  • Using a pair of tweezers to peel the tape greatly simplifies the task if you've got them.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります