手順番号29–iPad Mini 3 Wi-Fi LCD Shield Plate Replacementを翻訳 - iFixit

修理を始めるには

修理する権利

ストア

注意：あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

ガイドに戻る

英語

日本語

前の手順次の手順

手順 29を翻訳中

手順29

Do not attempt to fully remove the LCD. It is still connected to the iPad by several cables at the home button end. Lift only from the front-facing camera end.

Insert the flat end of a spudger under the LCD between it and the LCD shield plate and lift gently.

Do not attempt to fully remove the LCD. It is still connected to the iPad by several cables at the home button end. Lift only from the front-facing camera end.
Insert the flat end of a spudger under the LCD between it and the LCD shield plate and lift gently.
Be very careful not to get the spudger under the shield plate. It must be between the LCD and the shield.
Even bending the LCD slightly can permanently damage it, so be extremely careful as you lift.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。