手順番号2–iPod Touch 4th Generation Front Panel Replacementを翻訳 - iFixit

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての8個のガイドに反映されます。

ガイドに戻る

英語

日本語

前の手順次の手順

手順 2を翻訳中

手順2

Beware, as the Touch will be very hot. It may be helpful to hold it with a towel while prying.

Insert the edge of an iPod opening tool between the front glass panel and the plastic bezel near the home button.

Beware, as the Touch will be very hot. It may be helpful to hold it with a towel while prying.
Insert the edge of an iPod opening tool between the front glass panel and the plastic bezel near the home button.
Do not try to pry between the plastic bezel and the steel rear case.
Pry the bottom edge of the front panel upward, being careful not to bend the glass excessively.
If it is too difficult to pry up the front panel assembly, reheat it and try again.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。