メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

英語
日本語

手順 7を翻訳中

手順7
Loosen the connector assembly. It is not glued or held back by clips, so a slight wiggle is enough to pull it. Pull out the sealing rubber and filter Carefully but thoroughly clean the housing, the seal and the filter of any calcified remains.
Cleaning the connector assembly
  • Loosen the connector assembly. It is not glued or held back by clips, so a slight wiggle is enough to pull it.

  • Pull out the sealing rubber and filter

  • Carefully but thoroughly clean the housing, the seal and the filter of any calcified remains.

  • Clean the underside of the housing where the assembly is connected to the housing. Remove all calcified remains from here as well

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります