メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

英語
日本語

手順 3を翻訳中

手順3
With the back of the device towards you, start on the left panel It is connected with 6 clips at the lower part, and several more for the top part Carefully pry loose the clips from the bottom upwards, starting with the clips on the bottom (red arrows)
Opening it up (3)
  • With the back of the device towards you, start on the left panel

  • It is connected with 6 clips at the lower part, and several more for the top part

  • Carefully pry loose the clips from the bottom upwards, starting with the clips on the bottom (red arrows)

  • next open up the clip next to the power cord

  • open up the three clips on the side of the panel (orange arrows). Locktabs grip the holes in the orange clips 1 and 2. They will let go if they are lifted directly outwards from their base. Just next to the locktabs are guide pins. they don't offer resistance during removal.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります