Skip to main content

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 3を翻訳中

Step 3
Use the point of a spudger to gently lift the battery connector up off its socket on the logic board. Be very careful to only pry up the battery connector, not the socket itself. If you pry up on the logic board socket, you may break the connector entirely. Make sure to pry up the battery connector before attempting any other repairs inside the device.
  • Use the point of a spudger to gently lift the battery connector up off its socket on the logic board.

  • Be very careful to only pry up the battery connector, not the socket itself. If you pry up on the logic board socket, you may break the connector entirely.

  • Make sure to pry up the battery connector before attempting any other repairs inside the device.

スパッジャーの先端を使用して、バッテリーコネクタを基板(ロジックボード)上のソケットから丁寧に待ちあげてください。

ソケットではなく、バッテリコネクターだけを慎重に待ちあげてください。基板(ロジックボード)のソケットを待ち上げると、コネクタが完全に破損する可能性があります。

[* black] Use the point of a spudger to gently lift the battery connector up off its socket on the logic board.
[* icon_caution [* icon_note] Be very careful to only pry up on the battery connector andconnector, not on the socket itself. If you pry up on the logic board socket, you may break the connector entirely.
[* icon_caution] Make sure to pry up the battery connector before attempting any other repairs inside the device.
[* icon_caution [* icon_note] Be very careful to only pry up on the battery connector andconnector, not on the socket itself. If you pry up on the logic board socket, you may break the connector entirely.
[* icon_caution] Make sure to pry up the battery connector before attempting any other repairs inside the device.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります