Skip to main content

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 29を翻訳中

Step 29
Do not attempt to fully remove the LCD. It is still adhered in place and connected to the iPad by several cables at the home button end. Lift only from the front-facing camera end. Insert the flat end of a spudger under the LCD between it and the LCD shield plate and lift gently.
  • Do not attempt to fully remove the LCD. It is still adhered in place and connected to the iPad by several cables at the home button end. Lift only from the front-facing camera end.

  • Insert the flat end of a spudger under the LCD between it and the LCD shield plate and lift gently.

  • Be very careful not to get the spudger under the shield plate. It must be between the LCD and the shield.

  • Even bending the LCD slightly can permanently damage it, so be extremely careful as you lift.

  • You can try these alternate removal methods to reduce your chance of cracking the LCD during the removal process:

  • Run a thin string (like floss or fishing line) under the display, starting from the top then working your way down

  • Use a thin, flexible card or plastic money note to cut through the adhesive starting from the top.

LCDを完全に取り外さないでください。ホームボタン側でLCDはまだ数本のケーブルによってiPadに接続されています。フロントカメラ側のみ持ち上げてください。

スパッジャーの平坦側をLCDとLCDシールドプレートの間に差し込み徐々に持ち上げます。

[* icon_note] Do not attempt to fully remove the LCD. It is still adhered in place and connected to the iPad by several cables at the home button end. Lift only from the front-facing camera end.
[* icon_note] Do not attempt to fully remove the LCD. It is still adhered in place and connected to the iPad by several cables at the home button end. Lift only from the front-facing camera end.
[* black] Insert the flat end of a spudger under the LCD between it and the LCD shield plate and lift gently.
[* icon_caution] Be very careful not to get the spudger under the shield plate. It must be between the LCD and the shield.
[* icon_caution] Even bending the LCD slightly can permanently damage it, so be extremely careful as you lift.
[* icon_note] You can try these alternate removal methods to reduce your chance of cracking the LCD during the removal process:
[* black] Run a thin string (like floss or fishing line) under the display, starting from the top then working your way down
[* black] Use a thin, flexible card or plastic money note to cut through the adhesive starting from the top.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります