メインコンテンツにスキップ
英語
日本語

手順 1を翻訳中

手順1
Apply heat to weaken adhesive. If using a heat gun, use a higher temperature such as 150℃ for a minute because the waterproof adhesive sticker is strong. Place the suction cup and pull to create a gap. Insert a guitar pick to cut the sticker and remove the back cover. Place the suction cup and pull to create a gap. Insert a guitar pick to cut the sticker and remove the back cover.
Remove back cover
  • Apply heat to weaken adhesive. If using a heat gun, use a higher temperature such as 150℃ for a minute because the waterproof adhesive sticker is strong.

  • Place the suction cup and pull to create a gap. Insert a guitar pick to cut the sticker and remove the back cover.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります