メインコンテンツにスキップ
英語
日本語

手順 5を翻訳中

手順5
Finally, cables that are not soldered to the board! (Take note, Studio II.) The RCA cable is easily removed. The motherboard easily lifts out, as there are no additional screws or clips holding it in place. The only thing securing it down were the angled screws we removed from the outer case. The motherboard measures 9.75" x 5.25" and the lower case measures 13.75" x 9.75".
  • Finally, cables that are not soldered to the board! (Take note, Studio II.) The RCA cable is easily removed.

  • The motherboard easily lifts out, as there are no additional screws or clips holding it in place. The only thing securing it down were the angled screws we removed from the outer case.

  • The motherboard measures 9.75" x 5.25" and the lower case measures 13.75" x 9.75".

  • The case of the 2600 is 2.6 times larger than the motherboard!

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります