Skip to main content
英語
日本語

手順 2を翻訳中

手順2
Insert your new CPU into the ZIF socket.  Note that two pins are missing from one corner of the grid.  Match that corner with the corner of the socket that is missing the corresponding holes.  Drop the chip in; it should go in without effort.  Rotate the screw on the socket 180 degrees clockwise to lock the new CPU in place.
Insert New CPU
  • Insert your new CPU into the ZIF socket. Note that two pins are missing from one corner of the grid. Match that corner with the corner of the socket that is missing the corresponding holes. Drop the chip in; it should go in without effort. Rotate the screw on the socket 180 degrees clockwise to lock the new CPU in place.

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります