メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

英語
日本語

手順 14を翻訳中

手順14
Sadly, the Streak's LCD is permanently adhered to the front panel glass. However, that LCD/glass subassembly is held in the front panel with very strong 3M adhesive, and could be removed with enough careful prying. The LCD is bonded to the front panel glass to increase the strength of the device and sensitivity of the capacitive touch panel.
  • Sadly, the Streak's LCD is permanently adhered to the front panel glass. However, that LCD/glass subassembly is held in the front panel with very strong 3M adhesive, and could be removed with enough careful prying.

  • The LCD is bonded to the front panel glass to increase the strength of the device and sensitivity of the capacitive touch panel.

  • The inner face of the front panel assembly isn't all that exciting. The ear speaker and vibrator motor can be seen near its top edge.

  • The touchscreen ribbon cable houses:

  • Pixcir's controversial Tango S32 Touchscreen controller

  • Atmel's ATmega168P 8-bit AVR microcontroller

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります