メインコンテンツにスキップ
英語
日本語

手順 1を翻訳中

手順1
Do not install the replacement feet on top of the factory installed feet. These may break off if the system is moved in the right way.
Where should you add new feet?
  • Do not install the replacement feet on top of the factory installed feet. These may break off if the system is moved in the right way.

  • Place your MacBook upside down on a clean flat surface.

  • Clean the laptop surface with rubbing alcohol or a similar cleaner.

  • Identify where you would like to place your new rubber feet. The new feet should be placed somewhere near the factory installed feet. Avoid placing the new feet on curved edges.

MacBookを裏返しにして表面上を綺麗に拭き取ります。

どこにゴム足を付け足したいか場所を決めます。付け足す場所は既存の足の付近にしましょう。ですがカーブのある端に取り付けるのは好ましくありません。

既存のゴム足の上に新しいゴム足をつけるのはオススメできません。このようにすると、既存の足にダメージを加えてしまいます。

クリーニング用のアルコール剤や同類のクリーニング剤を使って、ゴム足を取り付ける場所を綺麗に拭き取ります。

[title] Adding FeetWhere should you add new feet?
[* blackicon_caution] '''''Do not install the replacement feet on top of the factory installed feet.''''' These may break off if the system is moved in the right way.
[* red
] Place your MacbookMacBook upside down on a clean flat surface.
[* blackorange] '''''Clean the laptop surface with rubbing alcohol or a similar cleaner.'''''
[* yellow
] Identify where you would like to place your new rubber feet. PlacementThe new feet should be placed somewhere next tonear the existing feet, but do not place onfactory installed feet. '''''Avoid placing the curved edges as results will not be great.
[* icon_caution] Placing your
new adhesive feet onto of the existing feet is not advised. Doing this could cause damage to the existing feet if the new foot were to catch on something.
[* black] Use rubbing alcohol or a similar substance to clean where you have chosen to place the feet.
curved edges.'''''
[title] Adding FeetWhere should you add new feet?
[* blackicon_caution] '''''Do not install the replacement feet on top of the factory installed feet.''''' These may break off if the system is moved in the right way.
[* red
] Place your MacbookMacBook upside down on a clean flat surface.
[* blackorange] '''''Clean the laptop surface with rubbing alcohol or a similar cleaner.'''''
[* yellow
] Identify where you would like to place your new rubber feet. PlacementThe new feet should be placed somewhere next tonear the existing feet, but do not place onfactory installed feet. '''''Avoid placing the curved edges as results will not be great.
[* icon_caution] Placing your
new adhesive feet onto of the existing feet is not advised. Doing this could cause damage to the existing feet if the new foot were to catch on something.
[* black] Use rubbing alcohol or a similar substance to clean where you have chosen to place the feet.
curved edges.'''''

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります