メインコンテンツにスキップ

Fix Your Stuff

Right to Repair

Parts & Tools

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての48個のガイドに反映されます。

英語
中国語

手順 13を翻訳中

手順13
Leave the opening pick in the iPad slightly past the front-facing camera. Take a second pick and insert it to the left of the camera, where the first pick just was. Slide it back to the corner to completely cut any remaining adhesive. Leave the second pick in place to prevent the corner adhesive from re-sealing as it cools.
  • Leave the opening pick in the iPad slightly past the front-facing camera.

  • Take a second pick and insert it to the left of the camera, where the first pick just was. Slide it back to the corner to completely cut any remaining adhesive.

  • Leave the second pick in place to prevent the corner adhesive from re-sealing as it cools.

将刚才那片撬片稍微滑过前置摄像头然后放在原位不动。

拿起另外一个撬片,插入摄像头的左侧,重新滑过刚才撬片滑过的路径,来完全分离残留的粘合剂。

将第二块撬片就放在转角那里,防止粘合剂冷却后重新粘和上。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります