メインコンテンツにスキップ
英語
日本語

手順 1を翻訳中

手順1
Remove the ten silver T6 Torx screws securing the display (five on each side).  On the right a 9.6 mm screw secures the display data cable, also on the left the screw closest to the inside is 9.6 mm.  The others are 7.8 mm.
  • Remove the ten silver T6 Torx screws securing the display (five on each side). On the right a 9.6 mm screw secures the display data cable, also on the left the screw closest to the inside is 9.6 mm. The others are 7.8 mm.

  • Don't forget to replace the hinge end caps when reinstalling the display assembly. The end caps are side specific, so be sure that the posts are facing towards the lower case.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります