手順番号3–Removing the Time Capsule Model A1302 Lower Caseを翻訳 - iFixit

修理を始めるには

修理する権利

パーツ＆ツール

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての3個のガイドに反映されます。

ガイドに戻る

英語

日本語

手順 3を翻訳中

手順3

Position the rear side of the device (the side with Ethernet connectors) so that it is facing you.

Lift up the left side of the metal plate and slowly flip it over the right edge of the device.

Open the Time Capsule

Position the rear side of the device (the side with Ethernet connectors) so that it is facing you.
Lift up the left side of the metal plate and slowly flip it over the right edge of the device.
To prevent damage, do not lift the metal plate straight up or use force. As shown in the second picture, the fan is attached to the metal plate and connected to the logic board next to the power connector.
Since many people have had serious problems with the fan power connnector breaking, it is advisable to NOT try to disconnect the fan power connector. Be VERY careful with this connector. It is extremely fragile. If you absolutely have to disconnect the fan from the logic board, VERY carefully use a spudger or tweezers to do so.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。