手順番号5–Create a Micro-SIM to SIM Adapterを翻訳 - iFixit

修理を始めるには

修理する権利

ストア

ガイドに戻る

英語

日本語

前の手順次の手順

手順 5を翻訳中

手順5

Insert your Micro-SIM Card into the hole you cut out of the SIM.

If the Micro-SIM doesn't fit, you may need to cut away more plastic with the knife to enlarge the hole.

If you cut the hole slightly too big, put a piece of tape over the back of the SIM-Card (the side without the gold contacts) to hold the Micro-SIM in place. Trim away any excess tape with the knife.

Insert your Micro-SIM Card into the hole you cut out of the SIM.
If the Micro-SIM doesn't fit, you may need to cut away more plastic with the knife to enlarge the hole.
If you cut the hole slightly too big, put a piece of tape over the back of the SIM-Card (the side without the gold contacts) to hold the Micro-SIM in place. Trim away any excess tape with the knife.
You may want to add some tape even if the hole is the correct size; this will help prevent the Micro-SIM from coming loose inside the phone and getting jammed when you try to remove it.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。