メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

英語
日本語

手順 1を翻訳中

手順1
Use a Phillips #1 screwdriver to unscrew the four 12 mm screws that connect the cassette motor to the brackets. Wiggle the cassette motor to remove it from the two brackets. Do not remove the motor completely, only separate the motor from the two brackets. Remove the two wire sets that connect the cassette motor to the main circuit board. Then gently remove the motor.
  • Use a Phillips #1 screwdriver to unscrew the four 12 mm screws that connect the cassette motor to the brackets.

  • Wiggle the cassette motor to remove it from the two brackets. Do not remove the motor completely, only separate the motor from the two brackets.

  • Remove the two wire sets that connect the cassette motor to the main circuit board. Then gently remove the motor.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります