メインコンテンツにスキップ
英語
日本語

手順 9を翻訳中

手順9
All that is left is to remove the two screws that hold in the motherboard.
  • All that is left is to remove the two screws that hold in the motherboard.

  • Remove this 3 mm screw using the #0 Phillips screwdriver. The head of this screw is a bit wider than all of the rest.

  • Remove this 3 mm screw using the #0 Phillips screwdriver.

  • The screw circled in red is known as the write screw. Removal of this screw will allow for either unintended or intended overwriting of the BIOS which can cause catastrophic damage. So be sure to replace this screw by all means necessary if lost.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります