メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 4を翻訳中

手順4
The rubber membrane surrounding the home button is very thin and tears easily. Apply mild heat (with an iOpener, heat gun, or hair dryer) to soften the adhesive securing the home button membrane.
  • The rubber membrane surrounding the home button is very thin and tears easily.

  • Apply mild heat (with an iOpener, heat gun, or hair dryer) to soften the adhesive securing the home button membrane.

  • Using your fingertip, apply firm, constant pressure on the home button from the front side of the display assembly, until the membrane starts to separate from the front panel.

  • Do not push the home button all the way through—you only need to get a corner free so that you can pry it free with a spudger.

ホームボタンの左端上部をゆっくりと持ち上げ、フロントパネルから外します。

ホームボタンを完全に上まで持ち上げないでください。ホームボタンの端を軽く上げ、そこからスパッジャーを使うと簡単に外せます。

この表面はとても薄くなっています。ボタンを壊してしまうと感じたら、この部分を少し温めましょう。( iOpenerやヒートガン、ヘアードライヤーなど使います)温まったら作業を再開してください。

[* icon_caution] The rubber membrane surrounding the home button is very thin and tears easily.
[*
black] Gently pushApply mild heat (with an [product|IF145-198-2|iOpener], heat gun, or hair dryer) to soften the top left corner ofadhesive securing the home button up awaymembrane.
[* black] Using your fingertip, apply firm, constant pressure on the home button from the front side of the display assembly, until the membrane starts to separate
from the front panel.
[* icon_caution] The rubber membrane surrounding the home button is very thin and tears easily.
[*
black] Gently pushApply mild heat (with an [product|IF145-198-2|iOpener], heat gun, or hair dryer) to soften the top left corner ofadhesive securing the home button up awaymembrane.
[* black] Using your fingertip, apply firm, constant pressure on the home button from the front side of the display assembly, until the membrane starts to separate
from the front panel.
[* icon_caution] Do not push the home button all the way through—you only need to get a corner free so that you can pry it free with a spudger.
[* icon_note] This membrane is very thin. If you feel like you're going to tear the button, apply mild heat (with an [product|IF145-198-2|iOpener], heat gun, or hair dryer) and try again.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります