手順 4を翻訳中
手順4
-
Huzzah! The rear cover is held in place with various welcoming clips, instead of fierce adhesive.
-
No tools are required to pop this cover off—just some sturdy fingernails. All seems to be going well, until we notice the rear-facing camera is still lodged in the rear case...
-
The camera seems to fit a little too snugly in its cubicle in the rear case; it got pulled right out of its ZIF connector on the motherboard.
-
To make matters worse, the camera connector is on the underside of the motherboard, which means we'll have to remove the board to reconnect the camera.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。