メインコンテンツにスキップ
英語
日本語

手順 3を翻訳中

手順3
I used a utility knife to cut the nice white cover off the tiny printed circuit board.  There is a molded plastic cover similar to hot glue which had to be stripped off the PCB.
  • I used a utility knife to cut the nice white cover off the tiny printed circuit board. There is a molded plastic cover similar to hot glue which had to be stripped off the PCB.

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります