メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。

英語
日本語

手順 2を翻訳中

手順2
After removal of the ribbons, there is one final screw. Once you have removed this, the motherboard easily pries out with spudger. This is the only screw that differs in size. This screw is a philips 00, 3.00 mm. in length. This is the only screw that differs in size. This screw is a philips 00, 3.00 mm. in length.
Removal of Motherboard
  • After removal of the ribbons, there is one final screw. Once you have removed this, the motherboard easily pries out with spudger.

  • This is the only screw that differs in size. This screw is a philips 00, 3.00 mm. in length.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります