メインコンテンツにスキップ
英語
スペイン語

手順 10を翻訳中

手順10
Hold the screen with one hand and gently remove the display cable from the back side of the screen. The display cable is typically glued or taped to the back of the screen. Take care to carefully lift the tape and slowly pull cable. To avoid damaging screen ribbon cable, use caution and be gentle. Do not yank or remove with force. Avoid bending the ribbon cable which can cause the wires inside it to snap and break.
  • Hold the screen with one hand and gently remove the display cable from the back side of the screen.

  • The display cable is typically glued or taped to the back of the screen. Take care to carefully lift the tape and slowly pull cable.

  • To avoid damaging screen ribbon cable, use caution and be gentle. Do not yank or remove with force. Avoid bending the ribbon cable which can cause the wires inside it to snap and break.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります