メインコンテンツにスキップ
英語
日本語

手順 2を翻訳中

手順2
no we will remove the printhead and the cardridges. be carefull with the remaining inkt. To remove the printhead you have to plug in the printer again and open up te front panel (like you have to remove the cardridges).
  • no we will remove the printhead and the cardridges.

  • be carefull with the remaining inkt.

  • To remove the printhead you have to plug in the printer again and open up te front panel (like you have to remove the cardridges).

  • to remove the printhead you have to pull the levar up (grey) , be carefull its very rough to pull it up.

  • remove the printhead, if you only replace the printhead the guide stops here. be carefull for the pcb board, if you only clean the printhead do it carefully. clean it with destilled water, but do not touch the PCB.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります