メインコンテンツにスキップ
英語
日本語

手順 3を翻訳中

手順3
For the next step, you'll need to apply your iOpener directly to the broken glass left adhered to the iPad. To protect your iOpener from the glass and keep it from filling with glass dust, stick some masking tape to one side. Heat the iOpener and apply it to one edge of the iPad, directly on top of the pieces of glass that are still adhered to the rear case of the iPad.
  • For the next step, you'll need to apply your iOpener directly to the broken glass left adhered to the iPad.

  • To protect your iOpener from the glass and keep it from filling with glass dust, stick some masking tape to one side.

  • Heat the iOpener and apply it to one edge of the iPad, directly on top of the pieces of glass that are still adhered to the rear case of the iPad.

  • Leave the iOpener there for at least 90 seconds, to soften the adhesive holding these small pieces in place.

  • Be careful not to touch or otherwise disturb the LCD.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります