メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての6個のガイドに反映されます。

英語
中国語

手順 10を翻訳中

手順10
Temporarily leave your plastic card underneath the two rightmost battery cells to prevent them from re-adhering to the upper case. If using an iOpener, reheat it and reapply it, this time to the left-most battery cells. Again, leave the iOpener in each position for about a minute, reheating in between, to heat each half of the left-most battery cells.
  • Temporarily leave your plastic card underneath the two rightmost battery cells to prevent them from re-adhering to the upper case.

  • If using an iOpener, reheat it and reapply it, this time to the left-most battery cells.

  • Again, leave the iOpener in each position for about a minute, reheating in between, to heat each half of the left-most battery cells.

暂时将您的塑料卡放在两个最右侧的电池单元的下面,以防止它们重新粘到上壳上。

如果使用iOpener,请重新加热并重新使用,这次是最左边的电池。

再次,将iOpener放在每个位置大约一分钟,再加热,以加热最左边的电池的每一半。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります