メインコンテンツにスキップ
英語
日本語

手順 5を翻訳中

手順5
Use the tip of a spudger or your fingernail to flip up the ZIF retaining flap on the camera cable socket at the edge of the camera board near the top center of the front display bezel. Be sure you are prying up on the retaining flap, not the socket itself. Pull the camera cable out of its socket.
  • Use the tip of a spudger or your fingernail to flip up the ZIF retaining flap on the camera cable socket at the edge of the camera board near the top center of the front display bezel.

  • Be sure you are prying up on the retaining flap, not the socket itself.

  • Pull the camera cable out of its socket.

  • Peel the camera cable off the foam tape along the top edge of the display.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります