注意:あなたはさきほど閲覧していたガイドの前提条件を編集しています。あなたが行った変更は、この手順を含む個のガイド全体に影響を与えます。
手順 3を翻訳中
手順3

-
Remove the three screws from the logic board using the #00 Phillips screwdriver.
-
Lift the board away from the case but do not pull the logic board completely off, as it is still attached to the battery by a cable.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。