メインコンテンツにスキップ

iPad 2 GSMのGPSアンテナの交換

注意:あなたはさきほど閲覧していたガイドの前提条件を編集しています。あなたが行った変更は、この手順を含む個のガイド全体に影響を与えます。

手順 3を翻訳中

英語
日本語
手順3
iPad 2 GSM GPS Antenna Replacement: 手順 0、 1の画像 1
  • Place a reheated iOpener on the top edge of the iPad to soften the adhesive holding the GPS antenna to the rear case.

  • The GPS antenna is essentially a sticker covering the bottom of the right cellular data antenna's compartment. As you work to pry it out in the following steps, there is a good chance that it will tear and break. If you are attempting to salvage the antenna, use plenty of heat and be very careful.

iPad上部端に再加熱したiOpenerを載せ、GPSアンテナを背面ケースに固定している接着剤を柔らかくします。

GPSアンテナは、右側のセルラーデータアンテナのコンパートメントの底を覆っているステッカーです。 次の手順でこじ開けるように作業すると、破れて破損する可能性があります。 アンテナを再利用る場合は、十分に温めてから作業を進めてください。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります