メインコンテンツにスキップ

ご注意:あなたは前提となるガイドを編集しています。あなたが行なう変更は、この手順を含むガイド全体に反映されます。

英語
中国語

手順 3を翻訳中

手順3
Remove the two 4.0 mm T5 Torx screws securing the MagSafe DC-In board to the upper case. Depending on your model, the DC-In  board may not be secured to the upper case.
  • Remove the two 4.0 mm T5 Torx screws securing the MagSafe DC-In board to the upper case.

  • Depending on your model, the DC-In board may not be secured to the upper case.

  • Slide the MagSafe DC-In board towards the right to free it from its recess within the upper case.

  • Lift and remove the MagSafe DC-In board out of the upper case assembly.

拧下如图两颗4.0mm T5 梅花螺丝, 它们是为了将 MagSafe DC-In板链接到C壳上。

向右滑动MagSafe DC-In板,使其脱离C壳链接处的凹槽。

将MagSafe DC-In板提起然后从C壳组件中取出

[* red] Remove the two 4.0 mm T5 Torx screws securing the MagSafe DC-In board to the upper case.
+ [* icon_note] Depending on your model, the DC-In board may not be secured to the upper case.
[* black] Slide the MagSafe DC-In board towards the right to free it from its recess within the upper case.
[* black] Lift and remove the MagSafe DC-In board out of the upper case assembly.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります